The reticle revolution
Reticle in the first focal plane, thin reticle structures with minimal target subtension even on highest magnification, daylight-visible illuminated dot, adjustable to extreme light conditions: From daytime in winter to hunting at night. Enabled by Swiss technology.

Bold reticle bars which affect the view at high magnifications were up to now a disadvantage when positioning the reticle in the first focal plane. Thanks to the innovative Swiss phase grating technology, it was possible to realize a low subtension of the reticle with the Blaser riflescopes – even at high magnifications. In combination with the illuminated dot, which can be adjusted due to visibility conditions, a perfect balance is achieved to support accurate shooting under all hunting scenarios.

iC Illumination Control
If the Blaser R8 bolt action rifle features an iC cocking slide, pushing the cocking slide into the ready-to-fire position automatically activates the illuminated dot in all Blaser riflescope models.

A sensor in the riflescope recognizes the position of the cocking slide and automatically regulates the switch-on/-off function of the illuminated dot. In order to prepare for the shot one single movement is enough: Pushing the cocking slide forward. The illuminated dot's intensity then always corresponds to the intensity that was adjusted last. Its adjustment is comfortably done using the turret on the scope's right. Thanks to this perfect interplay of rifle and scope you gain time and thus the necessary calmness for a safe shot.

When using Blaser riflescopes on rifles without iC cocking slide, the illuminated dot is activated manually by pulling out the turret on the right. In order to reach the longest possible battery life, the illuminated dot automatically switches off as soon as the rifle is in a very steep to vertical or lying position. Once taking a shooting position again, the illuminated dot is automatically activated.

"How to - Blaser Illumination Control" Video

IVD – Intelligent Variable Dot
The Blaser B1 1–7x28 iC is state-of-the-art level performance additionally equipped with an Intelligent Variable Dot. Rough terrain, foul weather, and high levels of stress will put even the most experienced hunter to the test. The dual output feature of the illuminated dot is just the answer you have been searching for. At low power of magnification, 4x and lower, the illuminated dot is larger in size and ideal for fast moving game providing ideal situational awareness and intuitive target acquisition. The IVD’s dot intensity can also be adjusted by a side mounted turret.

Above 4x magnification the dot size is automatically reduced for accurate shot placement over long distances. Precise dot resolution is essential for target identification and shot placement. The dot intensity can also be adjusted by a side mounted turret. Whether bright sun, reflective snow or deep twilight, as soon as the game comes into sight, target acquisition is intuitive.

QDC – Quick Distance Control
Shooting over very long distances while hunting is the exception rather than the rule. However, there are situations, in which a long-range shot may become necessary. Good, when you are technically prepared for being able to remain on target and not having to aim higher. The reticle adjustment of the Blaser riflescopes was specially developed for this purpose. Its highly precise and at the same time robust mechanics provide a consistently reliable repeat accuracy.

The riflescope models Blaser B1 2.8–20x50 iC and 4–20x58 iC come with QDC Quick Distance Control as a standard. Before shooting over long distances, the corresponding elevation correction of the fast reticle adjustment can be done quickly and easily even when already in shooting position. A unique feature is the possibility to fix the two adjustments “zeroed” and GEE (4 cm high with a rifle that is zeroed at 100 m). This insures that an unintentional adjustment is not possible. Nevertheless hunters can easily make windage or elevation adjustments with just one twist of the hand, should they need. If, due to a long shooting distance, 4 cm high shot at 100 meters should not be sufficient, the reticle elevation adjustment can be rotated further by the necessary “number of clicks”. In this case, the adjustment is not locked by lowering the adjustment turret, so that its previously selected adjustments remain clearly visible. With this, the risk of forgetting to set back to “normal position”, is almost excluded.

The adjustment turret for parallax is also protected against unintended movement. The turret is locked for a distance of approximately 100 m. The turret is also graduated for distances greater than 100 m and is easily pulled out to select the desired distance.

Rifle and scope – a perfect match 
The Blaser riflescopes were designed by hunters with a passion for hunting. Thanks to the sophisticated layout and intuitive handling of all functional elements, the hunter can totally focus on a safe and accurate shot. Their distinctive design gives rifle and scope a perfectly shaped overall appearance.